Author Topic: Inspire Clone V1 Build instructions  (Read 2665 times)

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 25
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Inspire Clone V1 Build instructions
« on: May 08, 2017, 12:44:08 AM »
Hi everyone, I am proud to be here with you and to thank CdRsKuLL, for his great gesture of giving me the opportunity to share my files with all this community.

I'm going to explain a little bit about what my job is about:

Clone Inspired V1 based on Pixhawk, Apm and Naza mainly, this design was created by Dale a friend and colleague in which I was introduced later because I saw some very beautiful principles, since then and worked totally in my own 3d designs and Models for my taste and to correct many failures of arming of main structure.


All the improvements that each user can make will have to be verified and tested 100% that that part works correctly and is 100% functional to be added for download as a valid file, this is not to have 100 pieces of the same part with only 1 modification

El gimbal a sido diseñado también para 2 modelos diferentes

1º modelo de gimbal 3 ejes con motores storm32 de 3 ejes
2º modelo de gimbal 2 ejes con motores DYS de 2 ejes

There are 2 inspire Clone V1 designed and running


Quote
1st option for the users is central axis with a printed thread of 96mm that will raise and lower the arms by means of a simple servo of 13 kilos of torque
 
Lift arms for 22mm tubes
T-arms for tubes of 22mm x 18mm


2nd option and the one I use because I like it more is for my most effective and beautiful
The center is raised by an iron thread used in 3d printers with 2 end of runs and a servo from 8 kilos upwards of torque.

Lift arms for 25mm tubes
T-arms for 25mm x 18mm tubes
(The latter I am modifying by 25mm x 22mm for the T arms)
« Last Edit: May 08, 2017, 02:18:27 AM by CSL-Navas »

Offline Willsonut

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
    • คาสิโนออนไลน์ เครดิตฟรี 2018
Re: Inspire Clone V1 Build instructions
« Reply #1 on: April 10, 2018, 11:20:17 AM »
It is a very good advice. It helped me a lot. It is really useful.

Offline Casynikx

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone V1 Build instructions
« Reply #2 on: September 17, 2018, 10:09:12 AM »
I'm sure I can advise you on the issues mentioned here.