Author Topic: Gimbal 2 ejes y 3 ejes  (Read 2321 times)

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 27
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Gimbal 2 ejes y 3 ejes
« on: March 01, 2017, 05:37:27 PM »
I present here our design of gimbal rotary of 2 models for gimbal 2 axes and 3 axes

2-axis model uses DYS brand motors
3-axis model uses 3-axis gimbal storm32 motors

This model has been designed completely, with reinforcements implemented, and realized for cameras Sj4000, xioami and i, we will make later models for cameras Gpro, Firefly 6s etc

We have worked with ABS and PLA models the result in ABS is very amazing after going through acetone, PLA is a little harder to leave smooth, but if you work with PLA down to 0.1mm of line separation, also with 25% Of filling is sufficient, but we have tried with 25% and 50% of filling.

The most sensitive part is where the anti-vibration gums are placed, but with care will not have problem

This gimbal is self-locking and blocks with just turn as the original of inspired 1, hemso tried similar to the original, with a central ajugero to pass the wires, this gimbal is very good for many drones which we encesitas a lace and rapid disembedding of the gimbal , As inspired or similar.





« Last Edit: March 01, 2017, 05:39:45 PM by CSL-Navas »

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 241
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Gimbal 2 ejes y 3 ejes
« Reply #1 on: March 02, 2017, 08:04:16 AM »
Ya lo imprimiste?  Vas a compartir aqui los STL files?

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 27
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Re: Gimbal 2 ejes y 3 ejes
« Reply #2 on: March 02, 2017, 10:44:17 AM »
Hi, if it is already printed and used by us, the files that will be shared STL will be only the 2 axes, the 3 axes will not

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 241
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Gimbal 2 ejes y 3 ejes
« Reply #3 on: March 02, 2017, 04:46:43 PM »
It really looks magnificent. I like it.

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 27
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Re: Gimbal 2 ejes y 3 ejes
« Reply #4 on: March 02, 2017, 05:38:32 PM »
Here the GCode of Gimbal Complete 2 axes, ok, only Gcode file ready to print

http://www.mediafire.com/file/1smega4093n9xbf/Gimbal.zip

Offline whitie63

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Gimbal 2 ejes y 3 ejes
« Reply #5 on: May 16, 2019, 12:46:35 PM »
Hello friend I was wondering could you please send me the STL files for the gimbal or possibly the SAT files I would very much appreciate that I print with pla only in the settings are hard-coded in your G-Code file for abs again I would very much appreciated thank you

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 27
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Re: Gimbal 2 ejes y 3 ejes
« Reply #6 on: May 16, 2019, 12:48:13 PM »
I am now in other projects if you want the latest files of this send an email to canariastockdrones@gmail.com

later I will re-upload here the new and my latest projects

Offline whitie63

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
not sat file
« Reply #7 on: May 20, 2019, 01:49:29 AM »
hello again friend I'm contacting you because I printed all the files and now I'm pretty frustrated because  I don't know if you noticed but the files that you uploaded for the upper compartment are Stl files which I can print but not manipulate to make more room for my components I cannot fit all my components underneath the rear compartment of the drone controller that I intend to use is an A2 from DJI which apparently has a lot more components then you had intended  the use of in the Drone so I'm asking would you kindly please sir send me the SAT files for the rear upper compartment of the Drone I would greatly appreciate that it would be most helpful to me

Offline CSL-Navas

  • Global Moderator
  • Drinks Maker
  • *****
  • Posts: 27
  • Karma: +0/-0
  • Inspire creación desde el pensamiento
    • View Profile
    • Canarias-Stock
Re: Gimbal 2 ejes y 3 ejes
« Reply #8 on: May 20, 2019, 08:01:09 AM »
hello friend I will pass all more files to you by email today or tomorrow ok? There are too many files.