Author Topic: Inspire Clone Electronics  (Read 96910 times)

Offline cghelobubba

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #90 on: January 22, 2017, 05:29:59 AM »
very nice. Have you tested the sonar out yet at all ?


Yes.  Works like a champ.  There is a bug that cycles the gear up then down if I inadvertently power on the aircraft before the transmitter.  Should be an easy fix, just haven't gotten to it.

Offline cghelobubba

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #91 on: January 22, 2017, 02:33:42 PM »
very nice. Have you tested the sonar out yet at all ?


Yes.  Works like a champ.  There is a bug that cycles the gear if I inadvertently power up the aircraft before the transmitter.  Not a big deal but something I need to go after.

Offline ehabibrahim

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #92 on: March 11, 2017, 04:08:30 PM »
Hi All,

Im still making Inspire and here is the the Err from the Arduino any Help will be great. Thanks

/Users/ehabalmassrey/Documents/Arduino/Drone/Drone.ino:12:0: warning: "PIN1" redefined
 #define PIN1 2
 ^
In file included from /Applications/Arduino.app/Contents/Java/hardware/tools/avr/avr/include/avr/io.h:627:0,
                 from /Applications/Arduino.app/Contents/Java/hardware/tools/avr/avr/include/avr/pgmspace.h:90,
                 from /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/cores/arduino/Arduino.h:28,
                 from sketch/Drone.ino.cpp:1:
/Applications/Arduino.app/Contents/Java/hardware/tools/avr/avr/include/avr/portpins.h:71:0: note: this is the location of the previous definition
 #define    PIN1         1
 ^
Sketch uses 5408 bytes (37%) of program storage space. Maximum is 14336 bytes.
Global variables use 295 bytes (28%) of dynamic memory, leaving 729 bytes for local variables. Maximum is 1024 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 839
  • Karma: +60/-5
  • The fat dude
    • View Profile
Re: Inspire Clone Electronics
« Reply #93 on: March 11, 2017, 04:12:33 PM »
You might need to set the correct board and port in the options..

Click tools then board and if you are using the nano.. then pick the Arduino Nano 328 most likely.. set the com port and try again.


Thanks,

Steve
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline primigen

  • Drinks Maker
  • *
  • Posts: 12
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #94 on: May 06, 2017, 03:42:47 AM »
are you guys using a pdb (power distribution boards) for your esc's? if so where are you mounting it?

Offline Bioethical

  • Global Moderator
  • Builder
  • *****
  • Posts: 256
  • Karma: +2/-1
  • "Patience is the mother of science"
    • View Profile
Re: Inspire Clone Electronics
« Reply #95 on: May 06, 2017, 06:53:58 AM »
Hi Primigen, I mounted it in the space between the battery and the arms, there is a vertical space there. Please watch my video, maybe you can get to see it.

Offline primigen

  • Drinks Maker
  • *
  • Posts: 12
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #96 on: May 08, 2017, 08:02:50 PM »
ok thanks i'm going to have to figure out a different spot as i'm trying to fit the biggest battery set up possible. thanks for the reply

Offline leraver

  • Drinks Maker
  • *
  • Posts: 7
  • Karma: +0/-0
  • rookie
    • View Profile
    • My Inspiration
Re: Inspire Clone Electronics
« Reply #97 on: December 13, 2017, 03:38:33 PM »
Hello everyone,
I have a problem I can not find a powerful 360 servo running with the arduino code of the first page of the forum. In addition servo TowerPro MG995 servo seems not to be 360, or so I can not find a good shop.
Can you help me?

Offline Bioethical

  • Global Moderator
  • Builder
  • *****
  • Posts: 256
  • Karma: +2/-1
  • "Patience is the mother of science"
    • View Profile
Re: Inspire Clone Electronics
« Reply #98 on: December 14, 2017, 03:07:27 AM »
Hi Friend,
check on youtube a tutorial about how to fix your servo motor so it can spin 360. It should be easy. I hacked my servo and it works like a charm.

Vic

Offline Tempo_cz

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #99 on: January 29, 2018, 05:05:14 PM »
please help instructions some instructions how to load the code into arduino nano

Offline Bioethical

  • Global Moderator
  • Builder
  • *****
  • Posts: 256
  • Karma: +2/-1
  • "Patience is the mother of science"
    • View Profile
Re: Inspire Clone Electronics
« Reply #100 on: January 30, 2018, 01:21:42 AM »
Tempo_cz

1. You will need to download the Arduino program from arduino.cc and install.
2. I have also used an extra interrupt library which you will also need to install from https://code.google.com/p/arduino-pinchangeint/downloads/list and unzip and copy it into C:\Program Files (x86)\Arduino\libraries\PinChangeInth
3. Open up the arduino software and plug in your arduino nano, you will now need to set the port / board type from the drop down menus. Paste the boards code in above and upload.

Check this page to get the main code for your nano card and all the instructions:

http://diyrc.co.uk/3d-printed-inspire-clone/inspire-clone-electronics/

Vic

Offline Tempo_cz

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #101 on: February 08, 2018, 11:08:49 AM »
good day is a blueprint for how to plug electronics please? detailed

Offline Bioethical

  • Global Moderator
  • Builder
  • *****
  • Posts: 256
  • Karma: +2/-1
  • "Patience is the mother of science"
    • View Profile
Re: Inspire Clone Electronics
« Reply #102 on: February 08, 2018, 05:33:10 PM »
Hi Tempo,
What parts exactly do you want to connect? I could find a drawing or picture for you. Check my picture, maybe it helps.

Vic

Offline Bioethical

  • Global Moderator
  • Builder
  • *****
  • Posts: 256
  • Karma: +2/-1
  • "Patience is the mother of science"
    • View Profile
Re: Inspire Clone Electronics
« Reply #103 on: February 08, 2018, 05:44:29 PM »
This horrible drawing helped me a lot. Please check it thoroughly and feel free to ask questions.

Offline zhadden1989

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspire Clone Electronics
« Reply #104 on: April 18, 2018, 06:47:59 PM »
Hey bioethical could you post the other side of your build with the covers off I'm trying to see how people have all of the electronics set up