Author Topic: Inspire Clone Parts required  (Read 33150 times)

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 802
  • Karma: +46/-3
  • The fat dude
    • View Profile
Inspire Clone Parts required
« on: July 07, 2015, 09:54:38 PM »
Various parts will be required to build the quadcopter. I've sourced these from different places and will most likely not be the cheapest so please shop around. If you find somewhere then please post for others. You will also need to extend some wires so soldering will be required.

I've put the list in an excel file and have most likely forgot something. No RC components other than the servo are included in this list.

You will require some original DJI parts.

DJI Inspire 1 Airframe Top Cover Part 31 - 16.00
DJI Inspire 1 Airframe Nose Part 32 - 12.00
DJI Inspire 1 Airframe Base Part 37 - 17.00

DJI Inspire 1 Airframe Arms Part 33 - 5.00

These can be purchased from eBay / Inspire part suppliers etc. The price is what I paid.



RC Components I've used
4 x EMAX 3510 600kv motors (suitable for 4s battery)
Naza M Lite (flashed to v2) with GPS
4 x simonK ESC 30amp
Turnigy 5000mAh 4S1P 14.8v 20C Hardcase Pack Lipo
4 x 1347 Gemfan props

More info to come....
« Last Edit: July 29, 2015, 10:43:03 PM by CdRsKuLL »
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline Eltrocha

  • Junior Designer
  • **
  • Posts: 58
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #1 on: August 14, 2015, 12:09:13 AM »
What is the weight with everything included and how much flight time are you getting?

Thanks

Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #2 on: August 29, 2015, 01:09:22 AM »
CdRsKuLL, im 3/4 done printing now. in one of your pics on the outer lift arm. the bearing connected to  the small carbon rod. how is that bearing attached there and the inner. also what did you use for a worm rod and the lock at bottom of it the brass pcs. and 1 more question please on your 360 servo when doing the limit stops wire you you have a hand sketch diagram, of it going into the servo and what the esc for for it. need a diagram if you can just a quick please. Im going mine in black abs printing great. you can email me if you want. this pcs here that it connect to the other side is mirrored  also instead of the inspire outer shell pcs can the org pcs still work.
« Last Edit: August 29, 2015, 01:12:34 AM by eaglesight »

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 802
  • Karma: +46/-3
  • The fat dude
    • View Profile
Re: Inspire Clone Parts required
« Reply #3 on: August 29, 2015, 11:37:02 AM »
Hi Eaglesight, welcome to the forums.

I use the following parts on the leg adjustment link. A male M4 rod end and a M4 rivnut

M4 Rod end - http://www.amazon.co.uk/dp/B00F8ZT634

M4 Rivnut - http://www.ebay.co.uk/itm/Small-Head-Open-Steel-Grooved-Rivet-Nuts-Rivnuts-Nutserts-Blind-Nut-uk-/331639551026?

I used some epoxy glue to secure the rivnut into the end of the tube. You may need to run a 6mm drill down the end of the tube if it doesnt fit to start with depending on your ID of it.

Attached are some photos for you of these two parts.

The worm rod is this one - http://www.ebay.co.uk/itm/-/131456875216

Hope this helps
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #4 on: August 29, 2015, 11:49:55 AM »
Thank you, your forum on the inspire is great.

Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #5 on: August 29, 2015, 12:10:05 PM »
Can you post the limit switch mod diagram. i understand the switchs but not wiring it to the servo , just need what wires in the servo. if you have a pic of inside the servo to cut and connect. I seen the diagram posted just need better detail of the servo side of it, and what the last post on each limit switch goes to. thanks.

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 802
  • Karma: +46/-3
  • The fat dude
    • View Profile
Re: Inspire Clone Parts required
« Reply #6 on: August 29, 2015, 12:15:56 PM »
Hi Eaglesight, If you are not using the arduino then that mod you have seen is not mine. Huy507 did that modification, you might be better asking him as I'm not sure. He did post details about it in his build log which can be found here - http://diyrc.co.uk/inspire-build-diaries/(my-first-build-inspire-1-(/msg516/#msg516

Sorry I cant be more help on this one.
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #7 on: August 29, 2015, 12:43:32 PM »
Its ok you helped a lot. one last question, what are you using for the worm gear to servo adapter.

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 802
  • Karma: +46/-3
  • The fat dude
    • View Profile
Re: Inspire Clone Parts required
« Reply #8 on: August 29, 2015, 01:08:28 PM »
I used a 6mm to 8mm cnc coupling - http://r.ebay.com/nKjzn8

Thanks :-)
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #9 on: August 29, 2015, 03:52:25 PM »
did you use any printed bushings for the arms ect. if so you have the still on it. or what you used.

Offline rcfiddy1

  • Designer
  • ***
  • Posts: 161
  • Karma: +5/-1
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #10 on: August 29, 2015, 07:11:03 PM »
I have some in 3rd party parts section.

Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #11 on: August 30, 2015, 04:53:43 PM »
on your stl files for the inner leg housing both you have the mirrored  isn't the bottom one to have the tabs to mount to linkage arms also what bushing are you using for the inner arm to frame do you have a still for the inner bushings.

Offline rcfiddy1

  • Designer
  • ***
  • Posts: 161
  • Karma: +5/-1
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #12 on: August 30, 2015, 04:54:59 PM »
The inner arms I used the steel roller bearings.


The inner arms have 3 pieces, inner leg top, inner leg bottom and inner underarm link.
« Last Edit: August 30, 2015, 05:05:39 PM by rcfiddy1 »

Offline eaglesight

  • Drinks Maker
  • *
  • Posts: 46
  • Karma: +0/-2
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #13 on: August 30, 2015, 04:56:25 PM »
you don't have the still file posted for the bottom inner arm plate to inspire

Offline rcfiddy1

  • Designer
  • ***
  • Posts: 161
  • Karma: +5/-1
  • rookie
    • View Profile
Re: Inspire Clone Parts required
« Reply #14 on: August 30, 2015, 05:02:55 PM »
Its listed as inner under arm link. There are 2 types, one for a bearing and 1 for the brass hats. That will connect to leg mover plate inside of inspire frame.
« Last Edit: August 30, 2015, 05:08:53 PM by rcfiddy1 »