What size brass hat / bearings for the lower arm to arm link, please

Thanks found it

I do not believe there are any countersunk bolts. All button cap bolts

Is there a more accurate count on screw counts for each size. of the 16,20,25,30 35,40"s   i have some but want to make sure enough

Hi all, I really am a total Noob when it comes to all things RC. Can someone please advise if I need to buy 2 x CW props and 2 x CCW props or do I have to buy 4 of the same type?

You need two of each for a quad

What links/parts you need?

About the screw...
http://diyrc.co.uk/3d-printed-inspire-clone/finer-threaded-rod/

But you will either buy 30cm one from ebay in advance so lenght is no issue as you will cut it in process
And if you are going to make one from local hardware store like I did, no need to buy it first, as it is around a corner.
So you will have the printed parts already and could measure it easily

 Hi,

Firstable .... Sorry for my poor English.
1000 Thanks for this Project and the Forum. Sorry again if my question has been discuss yet.
 
 I’m reading the different post since many weeks … and I think I’will CRACK J
I’ve view different “inspire” projects but this one with spare canopy parts is great and the 22mm BOM is Great Great !!!
 
 I’ve view many motorization sets and I ‘don’t know which one feat the best.
The Boss “Skull” one seems to be EMAX 3510/600kv – - ESC 30 A - Lipo 4S 5000 – 13x4,7 props
And another project is like 4108/480 – ESC 30 – Lipo 6S 5200 – 14,4,7 props
 
For the motors … I’m really loosen. I’ve found this ones :  - DJI E800 … I’m not really fan due to the Prop which are compatible with DJI only 
- The Black Widow 390 KV with integrated ESC…. A com on Thingiverse tell that there are really great  with the Inspire
- 4108 Multistar or Sunnysky… they seem to not be powered on 6S with 14x4 Prop
- The  T-Motor like 4004 or 4006 or 3515

- And finally the Quanum 3510 
 
If you can Help me to choose the Good ones... Directly the Best Choice regarding you experience in fact 
(i've not million Euros ...)
 
 
Thanks again for this project
Regards
@++
 

Hi,

Firstable .... Sorry for my poor English.
1000 Thanks for this Project and the Forum. Sorry again if my question has been discuss yet.
 
 I’m reading the different post since many weeks … and I think I’will CRACK J
I’ve view different “inspire” projects but this one with spare canopy parts is great and the 22mm BOM is Great Great !!!
 
 I’ve view many motorization sets and I ‘don’t know which one feat the best.
The Boss “Skull” one seems to be EMAX 3510/600kv – - ESC 30 A - Lipo 4S 5000 – 13x4,7 props
And another project is like 4108/480 – ESC 30 – Lipo 6S 5200 – 14,4,7 props
 
For the motors … I’m really loosen. I’ve found this ones :  - DJI E800 … I’m not really fan due to the Prop which are compatible with DJI only 
- The Black Widow 390 KV with integrated ESC…. A com on Thingiverse tell that there are really great  with the Inspire
- 4108 Multistar or Sunnysky… they seem to not be powered on 6S with 14x4 Prop
- The  T-Motor like 4004 or 4006 or 3515

- And finally the Quanum 3510 
 
If you can Help me to choose the Good ones... Directly the Best Choice regarding you experience in fact 
(i've not million Euros ...)
 
 
Thanks again for this project
Regards
@++

Im using the Multistar 4108-480 on ZTW 30amp opto escs with the 4 cell 5200 from original plans and it flies great. Only issue is flight time is 7-8 mins.