Author Topic: Inspired Clone V2  (Read 9443 times)

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 817
  • Karma: +50/-3
  • The fat dude
    • View Profile
Inspired Clone V2
« on: February 16, 2016, 12:10:37 PM »
Well, I've been playing with the idea of doing my own design based loosely on the Inspire. It will still have the moving legs etc.. but no dji outer parts.


Let me know what you think of the design so far. I've reversed the servo so it's now at the bottom so should hold the legs better when they are down... any ideas / comment mmoost welcome.


Oh, and I think I should say right off the bat they I will be putting a very small charge on the STL files etc.. when released. Just to help pay for the site and my time designing / printing / testing it all.


Thanks,


Steve
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline jacpresta

  • Drinks Maker
  • *
  • Posts: 22
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspired Clone V2
« Reply #1 on: February 16, 2016, 06:53:49 PM »
Very nice project; we  impatiently expects the continuation and also OK to have small charge with the .stl file to pay the site and the large amount of work.

Offline Cygnus-X

  • Drinks Maker
  • *
  • Posts: 1
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspired Clone V2
« Reply #2 on: March 06, 2016, 08:44:09 PM »
Dude,


This beauty you are showing us here is so magnificent that i registered especially to encourage you to go forth in your project, it's insanely beautiful.


Thank you.

Offline Busted44

  • Elite DIY RC Supporter
  • Junior Designer
  • ******
  • Posts: 64
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspired Clone V2
« Reply #3 on: May 01, 2016, 07:06:02 AM »
Looking good Steve,


Is your first quad still in service?


Sorry as this is kinda a duplicate post as I asked Imbashammy the same question.


My print of your first model is in progress.
Cheers Buster.

Offline easttexas3d

  • Drinks Maker
  • *
  • Posts: 1
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspired Clone V2
« Reply #4 on: May 13, 2016, 08:29:37 PM »
Please let me know when available. Would love to do some testing.

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspired Clone V2
« Reply #5 on: May 19, 2016, 04:24:54 AM »
Please, let's do this. I'd prefer to make this one instead of repeating a DJI Inspire with the version of Fragmaster. I was about to start that one but decided to wait this for good.   

Offline StaticTank

  • Drinks Maker
  • *
  • Posts: 1
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Inspired Clone V2
« Reply #6 on: May 28, 2016, 07:40:00 PM »
Would love to see this. Already made one Inspire Clone, working on your model. Would love to have another one to build! I love building drones!

Offline Georgio Ferlini

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • alter Hase
    • View Profile
Re: Inspired Clone V2
« Reply #7 on: March 07, 2017, 10:42:18 AM »
Das Designe schaut sehr gut aus.  Wichtig ist für uns Selbstbauer aber daß die Teile die Du da entwirfst, auch druckbar sind.
ich meine man kann das schönste Modell haben, aber kann die Teile nicht herstellen, da ein 3D Drucker das nicht herstellen kann. Bitte achte darauf, dann bin ich dabei!
Super gute Idee!

LG Georgio
Georgio

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspired Clone V2
« Reply #8 on: March 08, 2017, 10:45:38 PM »
Giorgio, Es ist wichtig zu wissen, dass Steve wollte einige original-Ersatzteile verwenden, um die Drohne schauen origineller und halten die DJI-Menschen irgendwie glücklich, weil wir ihr Produkt Klonen waren.

Offline Georgio Ferlini

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • alter Hase
    • View Profile
Re: Inspired Clone V2
« Reply #9 on: March 08, 2017, 10:53:58 PM »
Ja OK, ich bin schon seit längerem auf der Suche nach einem Designe eines Quads das mehr einem "Luftschiff", jetzt nicht gerade einem Zepelin, ähnlich sieht. Da die Dinger sehr schnell unterwegs sind könnte ein Designe ähnlich einem Fisch, Shark oder so ähnlich aussehen! Wäre das nicht eine tolle Sache? Nicht unbedingt wie eine fliegende Leiter!
LG Georgio  ;) :D ::)
Georgio

Offline m.nowak

  • Elite DIY RC Supporter
  • Drinks Maker
  • ******
  • Posts: 12
  • Karma: +0/-0
  • rookie
    • View Profile
    • Power By Nowak
Re: Inspired Clone V2
« Reply #10 on: April 07, 2017, 11:19:07 PM »
I am printing your Mavic clone at the moment and was thinking about printing the Inspired 1 but found this one. I need to print this one! It looks amazing! :D

When and where are the files available?
//Mattias
DJI P1, DJI P2, DJI P2V, DJI P2V+, Turnigy F450, Turnigy H.A.L.

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspired Clone V2
« Reply #11 on: April 08, 2017, 04:48:33 AM »
Hi Friend,
Go to the top upper part of the site and click on "downloads" , and download the version "Inspire Clone STL v1.4" for "downloads" to show up, you need to sign in first

Victor

Offline m.nowak

  • Elite DIY RC Supporter
  • Drinks Maker
  • ******
  • Posts: 12
  • Karma: +0/-0
  • rookie
    • View Profile
    • Power By Nowak
Re: Inspired Clone V2
« Reply #12 on: April 08, 2017, 10:17:25 AM »
I have found the regular Inspired but would love to print Inspired V2  ;)

Hi Friend,
Go to the top upper part of the site and click on "downloads" , and download the version "Inspire Clone STL v1.4" for "downloads" to show up, you need to sign in first

Victor
//Mattias
DJI P1, DJI P2, DJI P2V, DJI P2V+, Turnigy F450, Turnigy H.A.L.

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspired Clone V2
« Reply #13 on: April 08, 2017, 05:24:09 PM »
Oh, that one is stopped by now. Because the Mavic became a priority and I don't know what Steve's plans are regarding that design.

Offline m.nowak

  • Elite DIY RC Supporter
  • Drinks Maker
  • ******
  • Posts: 12
  • Karma: +0/-0
  • rookie
    • View Profile
    • Power By Nowak
Re: Inspired Clone V2
« Reply #14 on: April 08, 2017, 09:27:39 PM »
Aha, I understand. Hope he continues the design, I would pay to get those STL-files when it is done :)
//Mattias
DJI P1, DJI P2, DJI P2V, DJI P2V+, Turnigy F450, Turnigy H.A.L.