Author Topic: Mavic Clone STL Files Version 4.1 F3  (Read 158193 times)

Offline rocketkittens

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #255 on: October 10, 2018, 06:45:37 PM »

Offline tieffe

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #256 on: October 10, 2018, 09:37:08 PM »
@tieffe 22xx is the right diameter, you want to use low KV motors for longer flight times.

https://www.aliexpress.com/item/4x-2212-920KV-Brushless-Motor-for-DJI-Phantom-F330-F450-F550-X525-F/32308852227.html?spm=2114.13010708.0.0.6e734c4d6QNACi
Many thanks...I asked that because I already have them ;)

Offline rocketkittens

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #257 on: December 24, 2018, 02:45:53 AM »
The 4in1 I've got doesn't fit, is the naza body wider than the f3 body or the other way round and what's the size difference.
Is it just the body that's different between the versions?
I'm hoping I don't have to redraw it.

Edit, I can get the board to fit but not inline with the gyro so will either move the gyro or altering in the configurator. I need to move some mounting points around and print another one otherwise it should work.

I am working on a new bottom that will have better spacing for 4in1 and also slot for optical flow sensor.

Offline geekabdo

  • Drinks Maker
  • *
  • Posts: 1
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #258 on: January 16, 2019, 05:12:05 PM »
Thanks Brooo

Offline Bimol

  • Drinks Maker
  • *
  • Posts: 1
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #259 on: April 30, 2019, 12:48:14 PM »
Hi, where I can download stl files? I am logged in but download section does not displays!

Offline Edy195

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #260 on: August 12, 2019, 05:45:51 PM »
Hi, where I can download stl files? I am logged in but download section does not displays!

http://diyrc.co.uk/downloads/?cat=5