Author Topic: Mavic Clone STL Files Version 4.1 F3  (Read 112061 times)

Offline tieffe

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #255 on: October 10, 2018, 06:33:12 PM »
It's possible to use 2205 motors?
Many thanks

Offline rocketkittens

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #256 on: October 10, 2018, 06:45:37 PM »

Offline tieffe

  • Drinks Maker
  • *
  • Posts: 3
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #257 on: October 10, 2018, 09:37:08 PM »
@tieffe 22xx is the right diameter, you want to use low KV motors for longer flight times.

https://www.aliexpress.com/item/4x-2212-920KV-Brushless-Motor-for-DJI-Phantom-F330-F450-F550-X525-F/32308852227.html?spm=2114.13010708.0.0.6e734c4d6QNACi
Many thanks...I asked that because I already have them ;)

Offline Kananga

  • Drinks Maker
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #258 on: November 08, 2018, 12:31:47 PM »
Guys, do the rear arms swing round and hit the nuts holding the front arms on or am I missing somthing?
The nuts for the front pivot stop the rear arms folding back fully, the only way I see forward is to have the nut on top.

Any help appreciated, I can't seem to find any pictures of completed machines that have been taken of the underneath for some reason.

http://diyrc.co.uk/mavic-build-diaries/naza-build-4-1-with-camera/msg5618/#msg5618
« Last Edit: November 08, 2018, 12:33:31 PM by Kananga »

Offline Kananga

  • Drinks Maker
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #259 on: November 15, 2018, 05:31:00 PM »
The 4in1 I've got doesn't fit, is the naza body wider than the f3 body or the other way round and what's the size difference.
Is it just the body that's different between the versions?
I'm hoping I don't have to redraw it.

Edit, I can get the board to fit but not inline with the gyro so will either move the gyro or altering in the configurator. I need to move some mounting points around and print another one otherwise it should work.
« Last Edit: November 16, 2018, 12:45:27 AM by Kananga »

Offline finn.bennet

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 F3
« Reply #260 on: November 26, 2018, 07:32:10 PM »
For anyone who wants to build a mavic clone (from germany):
I have got six ball pungers which were quite expensive actually that I do not need. So if anyone wants them just send me a message.
Sorry for the "spam", but they are quite difficult to get here in germany.

Finn