Author Topic: Mavic Lift-Off Platform  (Read 753 times)

Offline iRazoR

  • Elite DIY RC Supporter
  • Builder
  • ******
  • Posts: 253
  • Karma: +5/-0
  • rookie
    • View Profile
Mavic Lift-Off Platform
« on: November 19, 2017, 08:11:37 PM »
Hi@All,

I donīt know if I'm the only one with that problem but INAV in combination with a Sonar Sensor is a pain!
Everytime the Sensor gets a bit blocked by Grass, a Stone or whatever mother nature offers INAV detects the Sensors as faulty and disable it which prevent me from arming and I cannot lift off.

After getting pissed a few times I designed a small, lightweight and foldable Lift-Off Platform for the Mavic Clone which should make it easier to arm and fly.

The Design is pretty simple and needs only 5 screws and 2 nuts to put together.

I printed all Parts in PLA with 25% Infill, 3 Perimeters and 4 solid Layers.

ZIP File with all necessary Files attached. Just print one of each parts and three feets.

Any Feedback is appreciated

Regards
David
« Last Edit: November 20, 2017, 06:56:33 AM by iRazoR »
- David