Author Topic: Mavic Clone STL Files Version 4.1 Naza  (Read 71821 times)

Offline jkaechler

  • Drinks Maker
  • *
  • Posts: 10
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #150 on: February 02, 2018, 04:25:42 AM »
whether applicable in mavic clone, http://www.hobbywow.com/en-camera-gimbal-camera-for-c-fly-obtain-rc-quadcotper-obtain-05-p245120.htm

This would be awesome, if it can be operated by just applying power and maybe a pwm pitch control.  Is there any more information on this unit anywhere?

Offline skyman

  • Drinks Maker
  • *
  • Posts: 10
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #151 on: March 25, 2018, 03:55:41 PM »
hi having a problem with the front right leg, I always get an error stating that the part is "not manifold".
has anyone else had this error, and has a work around.

back legs and left front have so far printed well.77

 Neil

Offline Popol974

  • Drinks Maker
  • *
  • Posts: 4
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #152 on: May 22, 2018, 08:15:30 PM »
Hello,

is someone has a config based on black widow 2204 and naza-m V2 please?

I calibrate the esc with the channel 3 of a traditionnal rx and i think its good because the trottle is linear and smooth.

But when i put my turnigy ia6c by s-bus with the naza-m V2 : after arming, the 4 motors run low and the trottle do nothing until the middle and after the middle start brutaly the motors. the motors continue to increase speed even if i dont move more the trottle...

i try to fly...the drone come very fast up and i put down the trottle he falls very quick...so its impossible to fly correctly and smooth.

I am in GPS mode.

Thanks by advance

Offline skyman

  • Drinks Maker
  • *
  • Posts: 10
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #153 on: May 23, 2018, 07:12:15 PM »
Hi, I've not got that far yet. but i have read that taking off in GPS mode is not the best and can be a problem.

have you tried manual mode or alt hold?

Offline Popol974

  • Drinks Maker
  • *
  • Posts: 4
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #154 on: May 23, 2018, 07:37:36 PM »
hello,

thanks for your reply,

yes i have try in atti it seems to be better...

Why taking off in GPS is a problem? can you give me the link where you read this please?

Offline skyman

  • Drinks Maker
  • *
  • Posts: 10
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #155 on: May 23, 2018, 10:07:48 PM »
Hi, Sorry but I've been looking at forums and YouTube so much, that I can't remember where I read it.
 

Offline Millerboy3

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #156 on: May 31, 2018, 11:07:44 PM »
Hi, Sorry but I've been looking at forums and YouTube so much, that I can't remember where I read it.

Its actually stated in the Naza manual as well....

Offline finn.bennet

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #157 on: June 06, 2018, 02:46:13 PM »
Hello,

I am new to this forum and planning to 3d-print this Mavic Clone (Naza version). Very nice work btw!

I want to use some DJI 2312 motors I have laying around in combination with this lipo: https://hobbyking.com/de_de/turnigy-graphene-4000mah-3s-15c-w-xt60.html

Now the question is whether I should use the DJI 9450 9.4" Props and scale the mavic up or whether I should get some new smaller Props not scaling up the model. For example Graupner e-props 8x5.

Thanks by advance.
Finn

Offline Millerboy3

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #158 on: June 06, 2018, 04:28:14 PM »
Hello,

I am new to this forum and planning to 3d-print this Mavic Clone (Naza version). Very nice work btw!

I want to use some DJI 2312 motors I have laying around in combination with this lipo: https://hobbyking.com/de_de/turnigy-graphene-4000mah-3s-15c-w-xt60.html

Now the question is whether I should use the DJI 9450 9.4" Props and scale the mavic up or whether I should get some new smaller Props not scaling up the model. For example Graupner e-props 8x5.

Thanks by advance.
Finn

You don't need to scale it up.  I use standard 9450 dji props on mine with 2212 920kv motors with no issues.

Offline nogod4me

  • Drinks Maker
  • *
  • Posts: 9
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #159 on: August 06, 2018, 09:46:45 AM »
Hello! Have anyone tried to print prop adapters for these props? https://hobbyking.com/en_us/multirotor-folding-propeller-8x4-5-black-cw-ccw-2pcs.html will it strong and safely enough? For direct or Tstyle motors, like https://hobbyking.com/en_us/cnc-2-blades-folding-propeller-adapter-1-pair-28-12-gold.html

Offline patrick57

  • Drinks Maker
  • *
  • Posts: 25
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #160 on: August 06, 2018, 09:58:28 AM »

Offline nogod4me

  • Drinks Maker
  • *
  • Posts: 9
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #161 on: August 06, 2018, 10:20:31 AM »
You have to look at this place
http://diyrc.co.uk/mavic-build-diaries/a-build-from-miami/msg5405/#new
 ;) ;) ;) ;) ;)
Thank you! I will make my own for my direct mount motors (with 2 holes in 12mm between)

Offline josemi

  • Drinks Maker
  • *
  • Posts: 16
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #162 on: August 30, 2018, 07:14:08 PM »
Hello everyone. Great job CdRsKuLL. I want to build this clone but I have some doubts ... What version do I have to print for naza v2 .. the 4.1 ?. And I would like to know if the esc go inside the legs or inside the base ?, is that I have seen a partner who uploaded some files to put them inside the legs. Is it better on the legs or inside? Thank you. And sorry for my English.

Offline josemi

  • Drinks Maker
  • *
  • Posts: 16
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #163 on: August 31, 2018, 06:31:01 PM »
Hi. Nobody can help me?. Thank you.

Offline finn.bennet

  • Drinks Maker
  • *
  • Posts: 6
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Clone STL Files Version 4.1 Naza
« Reply #164 on: September 01, 2018, 05:22:42 PM »
Hello everyone. Great job CdRsKuLL. I want to build this clone but I have some doubts ... What version do I have to print for naza v2 .. the 4.1 ?. And I would like to know if the esc go inside the legs or inside the base ?, is that I have seen a partner who uploaded some files to put them inside the legs. Is it better on the legs or inside? Thank you. And sorry for my English.

Hi. Yes, if you use a Naza (Lite/V2) you should print the naza 4.1 files. I think it is better to put the escs in the arms, so you have more space in the body. Somebody here in the forum uploaded files to fit ESCs (max. 6x12x35mm).

Finn