Author Topic: Inspire 1 Build. Help in electronics (Google translate :))  (Read 3527 times)

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Inspire 1 Build. Help in electronics (Google translate :))
« on: September 12, 2017, 05:58:04 AM »
Hello. I'm Rick and i build Inspire 1 from STL 1.4. Built the body of Inspire and now I don't know what kind of electronics to buy.
Can you tell me something?)
Thank you in advance ;)

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #1 on: September 14, 2017, 12:44:42 AM »
Hello Rick,
Welcome to the forum. I see that your project is very advanced, congratulations!
Please check the following link for the electronics. If there is something that you need to clarify, do not hesitate to ask. We are here to help.  By the way, what is your origin language?

Vic

http://diyrc.co.uk/3d-printed-inspire-clone/inspire-clone-electronics/


Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #3 on: September 17, 2017, 12:11:56 AM »
Privet Freimor,

I see that the 14.8 voltage of your battery and the amount of 4 cells is the same. However, the 10000mAh  may be a way higher for the size of the ESC and motors (unless there is a better opinion here in this forum, anyone?) . I see that your motors are lower (475 KV ) and the recommended ones are 600KV, and those KV are directly to thrust and weight of the Inspire. Consider also the dimensions of the battery should be length 138mm and 43 mm by 45 mm.

You may be able to find the required electronics in Hobby king and eBay. I found it in those places.

Do Svedaniya,

Victor

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #4 on: September 17, 2017, 07:14:33 AM »
This picture does not match what I want to buy
Quanum MT4108 580kv

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #5 on: September 17, 2017, 07:24:41 AM »
Okey, just maybe this?
Turnigy nano-tech 6000mAh 4S 25~50C Lipo Pack w/XT-90

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #6 on: September 17, 2017, 07:29:38 PM »
Freimor,
 I see those items are closer to the specifications given by Steve. Make sure that the battery fits well inside the crate of the Inspire.

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #7 on: January 25, 2018, 12:51:45 PM »
Electronics finally made it right. It remains to calibrate. So I hurried that I did not fix the right wing)
« Last Edit: January 25, 2018, 12:56:44 PM by Freimor »

Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #8 on: January 27, 2018, 01:33:44 AM »
Hurra! Mne nravitsja eta krasivaya drone. I think that you are almost there. Congratulations!

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #9 on: January 27, 2018, 06:08:35 AM »
He fly!!!

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #10 on: January 27, 2018, 06:11:10 AM »
I can not get the equipment to communicate with Arduino. The servo moves, but does not respond to the remote.

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #11 on: January 27, 2018, 07:02:58 AM »




Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #12 on: January 28, 2018, 01:23:03 AM »
Freimor,
Check all the connections related to the nano arduino card, servo motor and receiver. Make sure that the arduino coding is downloaded in your nano card.  To move the arms use a three steps stick or a turn on knob of your remote control. Connect two wires in the channel of your receiver that corresponds to the stick or the turn on knob, and the other extremes of those wires to the pin 5 and the ground of the nano card. If you prefer use the turn on knob of your receiver instead of the three steps stick ( for me the knob works better to make the servo to lift the arms up and down)
If you have more questions pleas let us know.

Victor

Offline Freimor

  • Drinks Maker
  • *
  • Posts: 13
  • Karma: +1/-0
  • Ireland soul
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #13 on: January 28, 2018, 04:34:10 PM »
I broke the axis of topology, but even with this problem he flew)) At the end, the fixings for the carbon pipes broke, they are too weak. I will try to make them out of metal.




Offline Bioethical

  • Global Moderator
  • Designer
  • *****
  • Posts: 233
  • Karma: +2/-0
  • "Patience is the mother of science"
    • View Profile
Re: Inspire 1 Build. Help in electronics (Google translate :))
« Reply #14 on: January 28, 2018, 05:45:23 PM »
Bro,
It's OK. NASA exploded due to errors very expensive spacecraft with people inside. Now, you surely know what went wrong with your inspire and also know what steps to take in order to make it correctly. Try to fly it with the legs down and move them up when is on the air.  See my first flight video:



Vic