DIY RC

Do It Yourself RC => 3d Printed Inspire Clone => Inspire Build Diaries => Topic started by: denscake on July 10, 2017, 07:41:17 AM

Title: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 10, 2017, 07:41:17 AM
Since April 11th I made some custom models and started printing. Now build is close to finishing.
*some photos*
Made from yellow and black PLA
STL attached
CdRsKuLL  can make it better
motors Sunnysky x4110 400 kv
Propellers DJI1555
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on July 10, 2017, 07:43:16 AM
more photos and STL here
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: Bioethical on July 14, 2017, 01:43:35 AM
Hello Denscake,
Welcome to the forum. Your build looks great and lighter. I'm Looking forward to see it flying.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on July 14, 2017, 03:35:30 AM
Hello Denscake,
Welcome to the forum. Your build looks great and lighter. I'm Looking forward to see it flying.
Hi Bioethical. It will be ready to fly today. Now I adjust canopy and battery housing. Looks cool, isn't it ?
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: Bioethical on July 14, 2017, 04:27:17 AM
Yeah, it looks cool. I'm sort of wondering if you modified or mixed some of the stl files from CSL-Navas or CdRsKull?.   I made the original from CdRskull (is on the videos) but I'm still thinking to make a new one as compact as possible. CSL-Navas's looks super cool and smaller. I'd really like to see yours finished and flying.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on July 14, 2017, 04:31:11 PM
Bioethical, I did not mix and did not change anyone's designs, this design was made by my friend who helps me with this build. Today I was able to start the motors on my clone . Now it's ready to fly. Remains to finish rc rx tx, or rather only rx, because in this build also used custom rx / tx based on arduino to control the servo was much easier
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: Tempo_cz on July 17, 2017, 10:16:16 AM
What is in that autodesk is downloadable for 3d printer
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: CdRsKuLL on July 21, 2017, 11:12:59 PM
denscake, wow.. what can I say, fantastic work on the cad drawing :-)  Have you printed the canopy / parts out yet? I might have to pull my old inspire out and give it a bit of an update!
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on November 19, 2017, 07:36:19 AM
(wow >120days unactive)

first flight video
Finally


so, one "leg" broken (Mr.epoxy not my friend anymore, now glued with Cosmofen )
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: Bioethical on November 19, 2017, 04:55:34 PM
Hello Denscake,
NASA has made worse take offs, even killed its astronauts. If I may, let me advise you regarding the legs: Before any further take off make sure that all the props housings are perfectly leveled by using a leveler, then adjust the locks and tight up the bolts. It should make that your next take off be smoother and straight up. Try to keep all your wires together to avoid accidents.
You are almost there.
Vic
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on February 21, 2018, 03:22:34 PM
Update. all broken parts replaced, lifting mechanism willn`t be used anymore, just glued all together and it not moving, ill test it tomorrow maybe. video will be attached.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based )
Post by: denscake on February 22, 2018, 10:28:05 AM
++++++++++++++++++++VIDEOVIDEOVIDEO+++++++++++++++++++++++++++
Yay. Video with test flight. Loud sound alert. Calculated flight time around 12-15 mins (battery were charged in past spring, so i don`t know real flight time on this battery). Gains on 100% and it not enough for this frame, It tilts really slowly. video link:
https://youtu.be/SwAOfaM22h4
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: denscake on February 22, 2018, 11:46:01 AM
If somebody want all stl models then just ask me, Ill find all models and ill publish it here (models are free but they are not ready for like "replace Steve`s parts to my and you`ll get I2 " and this is reason i still not uploaded them)
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: Bioethical on February 22, 2018, 09:53:36 PM
I tried to see the video on that link but is blocked. Can you check it?
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: denscake on February 23, 2018, 03:37:40 AM
Ill replace link tomorrow
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: denscake on February 24, 2018, 10:46:15 AM
New flight test link: https://youtu.be/SwAOfaM22h4
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: Bioethical on February 24, 2018, 11:03:33 PM
Hurra!  Mne Nravitsya etot drone. Not very happy ending, though. It is flying steady, which is very good. Now, take your time and continue working of the legs movement. Khorosho.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: denscake on February 25, 2018, 02:40:59 AM
Flight time test done. Flight time aroung 12-16 mins with 6s 10000mah battery, and we have 6s 16000mah one for tests
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: denscake on February 27, 2018, 02:34:14 PM
CANOPY PARTS PRINTED
That's most difficult parts because canopy is really thin.
Canopy painted with black matt spay paint.
Photos
(https://pp.userapi.com/c840127/v840127155/80b01/pOIsYixi6Dw.jpg)
(https://pp.userapi.com/c841026/v841026155/76bc6/kn6hamiEkw8.jpg)
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 22 02 18
Post by: zhadden1989 on April 18, 2018, 02:05:44 AM
If somebody want all stl models then just ask me, Ill find all models and ill publish it here (models are free but they are not ready for like "replace Steve`s parts to my and you`ll get I2 " and this is reason i still not uploaded them)

i would be interested in seeing your I2 files
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 02 18
Post by: denscake on June 27, 2018, 06:10:12 AM
I just got my stl's that were made when I2 was made. So I need to sort them all but there is more than 300 models and every model haven't named (key mesh) so I need to go through all of them .


good news for guys who want make I2 but they don't want to disassemble their I1 or make new one, I have model that was mixed from Steve's and my design, so you can just replace old bottom leg with new one and your I1 become around 1.5 inch taller
(https://pp.userapi.com/c844723/v844723375/8a497/de9xyuGX0aw.jpg)
(https://pp.userapi.com/c844724/v844724375/89947/OAK_bGw-FqA.jpg)
(https://pp.userapi.com/c848632/v848632236/1504e/0UE2tqUrmgU.jpg)


Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 02 18
Post by: KardoSysoev on June 27, 2018, 03:15:10 PM
Wow! Its perfect! Where i can get *.stl files? With best regards!
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 02 18
Post by: denscake on June 27, 2018, 05:30:40 PM
I'd recommend split in half before printing.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 01, 2018, 11:03:26 PM
Hi Denscake,

Can you share your stl files of canopy case please?  :)
And where did you find the I2 model?
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: KardoSysoev on July 04, 2018, 02:05:40 PM
Спасибо за новые ноги.
Обратил еще внимание, что зип архив, который на первой странице не включает в себя элемент один, а именно верхнюю крышку, мотормаунт которая. Может и ей поделитесь?))) Плиииз?))
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 04, 2018, 03:08:20 PM
Я так понял, что верхняя часть остается неизменной. Она есть в базовом комплекте by CdRsKuLL.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 04, 2018, 04:57:12 PM
да, именно так
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 04, 2018, 04:58:58 PM
Спасибо за новые ноги.
Обратил еще внимание, что зип архив, который на первой странице не включает в себя элемент один, а именно верхнюю крышку, мотормаунт которая. Может и ей поделитесь?))) Плиииз?))
понятия не имею где она, может быть её можно отыскать в той куче моделей которые мне вернули, но я не знаю когда буду этим заниматься
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: KardoSysoev on July 04, 2018, 06:46:53 PM
Я понимаю, что может быть это слишком нагло будет. Но что, если я попрошу Ваши модели общей кучей залить на облако и поделиться с нами. Я думаю Вам будут благодарны многие форумчане, тк Ваш проект очень привлекателен. Учитывая, что у Вас сложности со временем, а людей интересующихся тут достаточно, то можно реализовать совместными усилиями данный проект! И будет у нас новый inspire2! Заранее спасибо.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 05, 2018, 08:31:26 AM
Согласен с KardoSysoev. Тоже мог бы что-то поковырять/доработать и поделиться наработками.
denscake, если можно, выложи исходники, т.к. stl не всегда правильно конвертируется для внесения изменений.

Кстати, если кому интересно, наткнулся на проект реализации follow me режима. Жду детальки, чтобы повторить на своей раме.
Если получится, запихаю в Inspire.
https://github.com/iforce2d/inavFollowme (https://github.com/iforce2d/inavFollowme)
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: KardoSysoev on July 05, 2018, 12:12:48 PM
Согласен с KardoSysoev. Тоже мог бы что-то поковырять/доработать и поделиться наработками.
denscake, если можно, выложи исходники, т.к. stl не всегда правильно конвертируется для внесения изменений.

Кстати, если кому интересно, наткнулся на проект реализации follow me режима. Жду детальки, чтобы повторить на своей раме.
Если получится, запихаю в Inspire.
https://github.com/iforce2d/inavFollowme (https://github.com/iforce2d/inavFollowme)

Вы на чем строите? У меня лежит tarot zyxm, в нему tarot bd еще приобрел, моторы e800. Правда акк буду 4s использовать, а не 6s. Регуляторы у меня 35А, под 4s. Пока так буду, а там как пойдет
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 05, 2018, 01:43:00 PM
Сейчас рабочий набор:
Рама Daya 550
Matek F405-CTR
Favourite LittleBee 30A
Racerstar 4108 600kV
Сборка LiIon 4S4P
Подвес на Storm32 с камерой Sony FDR-x1000
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 08, 2018, 04:48:37 AM
поступил мне mavic air, думаю вот, ессть ли смысл делать его как 3д печатаемую модель или нет. сел разбирать полгига своих стл, скоро выложу что нарыл
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 08, 2018, 05:04:10 AM
Модели которые прям кастомные (всё чем он от I1 отличается не включая чуть чуть подрезаных ориг моделей)
Добавлю это к первому посту
3D models (all what different from I1 except slightly modified original models)
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: KardoSysoev on July 08, 2018, 12:59:02 PM
Спасибо огромное за stl. Есть еще вопросы. Элемент boom holder, каким образом в нем устроено движение карбоновой трубки с моторами? Ведь в первой версии используются подшипники. А в вашем вслучае просто трение карбоновой трубки и boom holder, верно?
И еще момент, касаемо canopy, как он себя ведет после печати, ведь она тонкая очень, не расслаивается?
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on July 09, 2018, 06:45:25 AM
Спасибо огромное за stl. Есть еще вопросы. Элемент boom holder, каким образом в нем устроено движение карбоновой трубки с моторами? Ведь в первой версии используются подшипники. А в вашем вслучае просто трение карбоновой трубки и boom holder, верно?
И еще момент, касаемо canopy, как он себя ведет после печати, ведь она тонкая очень, не расслаивается?
Верно, там только трение, срисовывали с реального инспайра который на ремонт к друзьям попал, там тоже подшипников не было. canopy мы залили суперклеем, содой и бумагой, не знаю как она без клея себя ведет, так как печатади по частям, но подозреваю что она ломается по слоям при сильных изгибах, хотя можно поставить и придумать крепление, чего мы не сделали
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 12, 2018, 08:24:59 PM
denscake,

Переделал твой boom holder... показался немного грамоздким.
Стал на 30% легче, очень жесткий, не люфтит на трубе, но легко вращается.
Дальше мотормаунты посмотрю... тоже большеваты.  :)

Можешь скинуть разрезанные для печати куски canopy?
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 13, 2018, 04:22:41 AM
denscake,

Переделал твой boom holder... показался немного грамоздким.
Стал на 30% легче, очень жесткий, не люфтит на трубе, но легко вращается.

Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: gsandr on July 16, 2018, 07:39:03 AM
Перерисовал ногу, весит 30гр.
Амортизация работает, проверил на 2кг нагрузке.
Разнес светодиоды, чтоб были видны сбоку.
Регуляторы планирую прятать дальше в трубе.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on September 24, 2018, 10:48:01 AM
Project paused for a undefined amount of time bc all my 6 3d printers just won't work, dunno why, so I can't repair, finish or rebuild my Inspire.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: Bioethical on September 24, 2018, 02:39:30 PM
Wow, that sucks. Tried to fix at least one of them using the other printers parts.
Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: denscake on September 27, 2018, 02:59:10 PM
The problem with printers is somewhere near the extruder, but I changed the whole block of the extruder, the motor, the cooling, the plastic, and even the main board of the printer, but that does not help, the plastic goes very tight, even on the absolutely new parts.

Title: Re: Inspire 2 build (Inspire Clone STL 1.4 based) [REVIVED] last update 27 06 18
Post by: CdRsKuLL on October 27, 2018, 01:27:16 PM
Did you repair your printer?  By the way, love your leg design it looks great.