Author Topic: 134% Scale Mavic Build  (Read 708736 times)

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #15 on: July 02, 2017, 08:16:36 PM »
Here are the arms.

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #16 on: July 02, 2017, 08:18:16 PM »
Here is the remainder. Enjoy

Offline digidoctor

  • Drinks Maker
  • *
  • Posts: 4
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #17 on: July 03, 2017, 11:02:53 PM »
Hi Jondevos,

Big big thanks to you man! We greatly appreciate your kindness and hardwork, also special mention to CDRSkull who started this craze. You guys are great contributors to the RC and 3D printing world of Drones. Best of regards to you guys. Cheers:)

I've downloaded it and will print asap.  Again, my sincere thanks :)

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #18 on: July 04, 2017, 01:57:00 AM »
Not a problem at all. If any issues just let me know. I had quite a few different copies on my computer but think I uploaded all the right ones.

Offline CHRISFARRUGIA66

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #19 on: July 04, 2017, 03:56:38 PM »
 ;D ;D ;D fantastic can not wait to give this a go will post as I go on

Offline ronson

  • Elite DIY RC Supporter
  • Junior Designer
  • ******
  • Posts: 51
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #20 on: July 06, 2017, 10:19:36 PM »
Thanks @jondevos for providing the files.


Offline Zuru1

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #21 on: July 10, 2017, 08:23:27 PM »
Hi,

Thanks for sharing.
One question, how much infill are you using when printing the parts?
Also does it matter if they are printed in PLA or ABS?


Offline digidoctor

  • Drinks Maker
  • *
  • Posts: 4
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #22 on: July 18, 2017, 02:11:15 AM »
Hi Jondevos,

I already printed and build mine. Unfortunately it crashed on the first flight.  It moves southward on stabilized mode.  I found out that the front arms STL files are not levelled straight on the motor mounting area. So the front motors are tilted around 15-20 degrees going backwards that's causing the bird to move southward.  I hope you'll share again the revised front arms of this great design.  Thank you.

Offline CdRsKuLL

  • Administrator
  • Master Builder
  • *****
  • Posts: 836
  • Karma: +58/-3
  • The fat dude
    • View Profile
Re: 134% Scale Mavic Build
« Reply #23 on: July 21, 2017, 05:10:31 PM »
Hey Digidoctor,

The tilted motors wouldnt cause it to move backward, they are tilted to reduce prop wash to increase stability. If it moved south then it would be that the flight controller wasn't level. Did you do any calibration first?
If you use any of my designs and can afford to donate to help pay for this site and the filament, or just buy me a beer then please click on the link below, enter an amount and donate what you want.


Offline Zuru1

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #24 on: August 05, 2017, 01:48:33 AM »
Hi,
Is it possible to get the cad files?

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #25 on: August 11, 2017, 03:00:04 AM »
Hi,
Is it possible to get the cad files?

Look up a few posts. I already put them on. Enjoy

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #26 on: August 11, 2017, 03:01:55 AM »
Hi,

Thanks for sharing.
One question, how much infill are you using when printing the parts?
Also does it matter if they are printed in PLA or ABS?

I printed arms at 70% and body at 30% using petg.

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #27 on: August 11, 2017, 03:06:41 AM »
Today I finally got a chance to tear it apart to fix it up. Turns out there was a lot more damage than I originally thought. It fell out of the sky from around 50 feet up.

I have decided to try to refine the design a bit and get everything into the standard size. Today I pulled it all apart to start figuring out layout. I'm planning to add in a gimbal as well.

I will start a new post with the new build when the time comes.

Offline Zuru1

  • Drinks Maker
  • *
  • Posts: 8
  • Karma: +0/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #28 on: August 11, 2017, 07:47:16 AM »
So this design at this scale is a no go?

Offline jondevos

  • Drinks Maker
  • *
  • Posts: 18
  • Karma: +2/-0
  • rookie
    • View Profile
Re: 134% Scale Mavic Build
« Reply #29 on: August 11, 2017, 01:51:51 PM »
So this design at this scale is a no go?

It's a go. I flew it a bunch. I crashed it so I have decided to go smaller this time. Challenge my building skills.