Author Topic: front top on mavic f3 4.1 too small : solved  (Read 534 times)

Offline LeManu84

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
front top on mavic f3 4.1 too small : solved
« on: February 16, 2019, 07:14:49 PM »
Hello all !

I start to print all parts and it look like the top front is too small !
I need to scale it to 102.7 %.
very strange because like I print all from the same printer I would not have problem..

Is there somebody who had same problem ??

Regards

Emmanuel from France.
« Last Edit: February 17, 2019, 03:38:01 PM by LeManu84 »

Offline foldingllama

  • Junior Designer
  • **
  • Posts: 95
  • Karma: +3/-0
  • rookie
    • View Profile
Re: front top on mavic f3 4.1 too small
« Reply #1 on: February 17, 2019, 10:30:24 AM »
Hello all !

I start to print all parts and it look like the top front is too small !
I need to scale it to 102.7 %.
very strange because like I print all from the same printer I would not have problem..

Is there somebody who had same problem ??

Regards

Emmanuel from France.

Weird. Mine came out perfectly. Just look at the thread of FoldingLlama. Kananga is also making his mavic clone at the moment (he has also a good thread).

Offline Kananga

  • Designer
  • ***
  • Posts: 143
  • Karma: +6/-0
    • View Profile
Re: front top on mavic f3 4.1 too small
« Reply #2 on: February 17, 2019, 11:18:15 AM »
Which version you printing? Do you have pics of the bad fitment?

Offline LeManu84

  • Drinks Maker
  • *
  • Posts: 2
  • Karma: +0/-0
  • rookie
    • View Profile
Re: front top on mavic f3 4.1 too small : solved
« Reply #3 on: February 17, 2019, 03:43:30 PM »
Well, I found the reason why my front top was too small..
Here is the story:

I put some filler on the front top before sand down, and to make it dry faster I put the front top on an electric heater.
Unfortunately the heater was a little to hot ... and what's happend when you heat pla ? it shrink...just 0.3% but that enough !
I reprint it and it fit perfectly!

;-)