Author Topic: Mavic Build from Serbia  (Read 4372 times)

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Mavic Build from Serbia
« on: January 27, 2019, 10:35:05 PM »
Greetings from Serbia,

My name is Dejan and I live in Serbia.

I looked at this DJ Mavic for a long time and finally decided to try to print one.
I downloaded parts and I started to print the first part.
1 - Base Middle - 30% Infil PLA
Can you tell me more about the printing procedure that infil and similar.
I plan for 70% infil for arms

Thanks in advance Dejan

Offline foldingllama

  • Designer
  • ***
  • Posts: 104
  • Karma: +6/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #1 on: January 28, 2019, 08:27:13 AM »
Nice, another fella making the Mavic. Which version (Naza or F3)?

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #2 on: January 28, 2019, 10:22:36 AM »
Download the F3 plan.
When I'm done, I'll see if there will be some modifications in terms of GPS, LED, Battery Indicators, .....

If it can only answer the question about infil.

Offline foldingllama

  • Designer
  • ***
  • Posts: 104
  • Karma: +6/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #3 on: January 28, 2019, 10:25:08 AM »
Download the F3 plan.
When I'm done, I'll see if there will be some modifications in terms of GPS, LED, Battery Indicators, .....

If it can only answer the question about infil.

OK. also download the clip from the NAZA version as this one works, but the one from the F3-version is not. Kananga (who's also working on this) mentioned it to me and he was right.

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #4 on: January 28, 2019, 10:36:41 AM »
OK thank you

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #5 on: January 28, 2019, 11:48:46 AM »
Did someone work in the front cover to install the GPS antenna and the battery indicator in the back cover?

Offline alexa

  • Drinks Maker
  • *
  • Posts: 21
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #6 on: January 28, 2019, 01:26:48 PM »
Hi, depends on what GPS you will use.
I bought a round one and used only the PCB which happens to be rectangular.
The stl file is attached for you to check it.

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #7 on: January 28, 2019, 07:27:36 PM »
Thanks for the STL file,


I use F4 V3 FC, Sonar HC-SR04, Racerstar BR2212 1000KV, EMAX BLHELI 20A , RunCam swift and TS5828L + Pagoda
I would use the BN-220 GPS with Dimension: 22mm * 20mm * 6mm

I'll try to modify an existing file, or use the one you sent me.
« Last Edit: January 28, 2019, 07:33:35 PM by uros2002 »

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #8 on: January 28, 2019, 08:44:20 PM »
I can not find how to connect
Omnibus F4 V3 pro

+ sonar HC - SR04
+ GPS BN220 - OK
+ Led RGB for ARM, GPS lock, Battery OK

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #9 on: January 28, 2019, 09:10:55 PM »
This is the FC that I have

I do not understand too much about this, so I need help.

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #10 on: January 28, 2019, 10:18:15 PM »

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #11 on: January 29, 2019, 07:45:20 PM »
Continuation of works

Offline alexa

  • Drinks Maker
  • *
  • Posts: 21
  • Karma: +0/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #12 on: January 30, 2019, 12:40:18 PM »
This is the FC that I have

I do not understand too much about this, so I need help.

You can check this page and see what version is your F4
https://www.dronetrest.com/t/how-to-identify-what-omnibus-f4-board-you-have/4735

I bought a similar with yours, if its exactly as the schema shows, and is F4 V3 not a Pro.



Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #13 on: January 30, 2019, 06:46:50 PM »
Now I checked this by the image controller I have



It's a clone version.
Ordered from this site
https://www.aliexpress.com/item/betaflight-F4-Pro-V3-Flight-Controller-Board-Built-in-Barometer-OSD-TF-Slot-For-FPV-Quadcopter/32885245893.html?spm=a2g0s.9042311.0.0.6ab04c4dDSe22L

Can someone tell me which version of FW inav or Betaflight to install on FC

Offline uros2002

  • Drinks Maker
  • *
  • Posts: 14
  • Karma: +1/-0
  • rookie
    • View Profile
Re: Mavic Build from Serbia
« Reply #14 on: February 02, 2019, 02:13:19 PM »
Hello,

I finished printing and tried to fit parts. He's got a little bit of finishing, but he's OK.
I was planning these engines to fit.

Where should I put this part from last picture?