Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - iRazoR

Pages: [1] 2 3 ... 17
1
Buy and Sell .... / Mavic Clone Parts to sell
« on: August 06, 2018, 11:07:10 AM »
Hi everyone,

Im happy that this community is still alive and also some people try to build their one mavic.
Unfortunately it didnt work for me also because of lack of free time and that is the reason why I have some parts to sell.
If somebody is interested please send me a PM. Because of high shipping costs, I only ship within EU.

4x foldable props for 6mm Motor shaft (fit on DYS BX2212 Motors for example) + Spare blades - 15
4x DYS BX2212 920KV Motor with 6mm Shaft (2x CW, 2x CCW) incl. Locknuts - 20
1x Mini Ublox M8N GPS Module NEO-M8N (https://www.banggood.com/Mini-Ublox-M8N-GPS-Module-NEO-M8N-GPS-for-APM-2_52_62_8-CC3D-SP-Racing-F3-Naze32-Flip32-PX4-p-1035454.html?rmmds=myorder&cur_warehouse=CN) - 25
1x HOBBYWING XRotor Micro 20A 4 IN 1 Brushless Motor ESC - 10
1x Multistar LiHV High Capacity 3000mAh 3S + LIPO Safe Back (max. 5 times charged) - 13
1x Gimbal Set containing Storm32 3-Axis Gimbal Controller, 3 Motors (2x 2204, 1x 2805) and 1x brand new NT IMU Module (Less issues and inteferences then the normal IMU Module) - 40
1x TBS Unify Pro HV Race Video TX + Short Pagoda Antenna - 25
1x Eachine ROTG01 OTG Video RX for Android Smartphones + Pagoda Antenna - 12

Package Price: 145

Please note that I cannot give any guarantee but I assure that all pieces worked until I disassembled my Mavic.

Delivery Cost within Germany 6,90 (DHL Paket)
Delivery Cost within EU on request

Cheers and have fun with your Build ;)

2
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: August 06, 2018, 10:39:52 AM »
Hi everyone,

Im happy that this community is still alive and also some people try to build their one mavic.
Unfortunately it didnt work for me also because of lack of free time and that is the reason why I have some parts to sell.
If somebody is interested please send me a PM. Because of high shipping costs, I only ship within EU.

4x foldable props for 6mm Motor shaft (fit on DYS BX2212 Motors for example) + Spare blades - 15
4x DYS BX2212 920KV Motor with 6mm Shaft (2x CW, 2x CCW) incl. Locknuts - 20
1x Mini Ublox M8N GPS Module NEO-M8N (https://www.banggood.com/Mini-Ublox-M8N-GPS-Module-NEO-M8N-GPS-for-APM-2_52_62_8-CC3D-SP-Racing-F3-Naze32-Flip32-PX4-p-1035454.html?rmmds=myorder&cur_warehouse=CN) - 25
1x HOBBYWING XRotor Micro 20A 4 IN 1 Brushless Motor ESC - 10
1x Multistar LiHV High Capacity 3000mAh 3S + LIPO Safe Back (max. 5 times charged) - 13
1x Gimbal Set containing Storm32 3-Axis Gimbal Controller, 3 Motors (2x 2204, 1x 2805) and 1x brand new NT IMU Module (Less issues and inteferences then the normal IMU Module) - 40
1x TBS Unify Pro HV Race Video TX + Short Pagoda Antenna - 25
1x Eachine ROTG01 OTG Video RX for Android Smartphones + Pagoda Antenna - 12

Package Price: 145

Please note that I cannot give any guarantee but I assure that all pieces worked until I disassembled my Mavic.

Delivery Cost within Germany 6,90 (DHL Paket)
Delivery Cost within EU on request

Cheers and have fun with your Build ;)

3
General RC Chitchat / [Germany] Anybody printing Nylon?
« on: April 13, 2018, 09:56:21 AM »
Hey Guys,

for another RC Project Im looking for somebody in Germany who is able to print Nylon (preferably Taulman 645).
I need to print couple of Gears which I tried first in PETG and after 2 Minutes of fun they lost about 50% of their Teeth.

If anybody could help me out I would really appreciate it. Of course I pay for the printed parts and the delivery!

Cheers
David

4
Mavic Build Diaries / Re: Just about finished....
« on: April 09, 2018, 08:40:38 AM »
Im wondering if it will fly with 5in Props?!

5
3d Printed Mavic Clone / Re: Mavic Clone STL Files Version 4.1 F3
« on: March 07, 2018, 03:43:37 PM »
I didnt made experience on my own but I could imagine it is hard to control and it would drain your battery a lot faster which is more important I guess.

6
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: March 07, 2018, 10:48:11 AM »
I dont own a 2805 so I cannot answer that question but yes, the holes for the 2204 are 12mm in distance.

7
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: March 07, 2018, 10:29:08 AM »
I have to measure home. I think they had a diameter of 28mm but Im not sure.

8
3d Printed Mavic Clone / Re: Mavic Clone STL Files Version 4.1 F3
« on: March 07, 2018, 10:18:30 AM »
Hi robcollie,

very good found, I couldnt find any other Motors with built-in ESC when I started my Build.
I dont see any reason why these Motors should not work. The only concern I have is that they are quite powerful with 2350KV. If you find them a bit lower with about 1000-1200KV would be better I guess but also with these should work.

9
I think many where thinking about it.
The problems I see:
- Where is the Gimbal Controller in the real Mavic? Im sure it is not a separate board but on the Mainboard
- Even if it is a separate Board, you wont find the Interfaces you need (f.e. a analog output for the FPV Video Signal)
- Right now there a only a few Solutions to use a Digital Video Signal as FPV Signal and they are all oversized and wont fit into the Mavic.

So overall I would say NO, it is not possible

BUT:
Im curious if you could connect the Original Mavic Lens Cable with the Runcam Split Mainboard...
The Ribbon Cables of both look pretty much the same, only the connectors are different.
That would give you at least the possibility to use a Mavic Gimbal together with your own Gimbal Controller and Runcam Split Board.
But I dont really have high hopes that is a "Plug&Play" thing  :(

11
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: March 02, 2018, 01:31:55 PM »
I used same as Steve did: 6mm diameter and 7mm length. Mine where from plastic with a steel ball.

https://www.amazon.de/gp/product/B01MRV8FIZ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

12
3d Printed Mavic Clone / Re: CAD files
« on: February 28, 2018, 09:10:25 AM »
You find the IGES Files in the Download Section which can be imported to Fusion360 for example.

13
Buy and Sell .... / Re: Wante print mavic frame
« on: February 27, 2018, 08:34:35 AM »
Hi ruben36,

I think it would help if you tell us where you are from.
I have mine to sell for example and I live in Germany.

14
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: February 10, 2018, 10:57:19 AM »
The GPS Pins to a free UART and the Compass Pins to I2C

15
Mavic Build Diaries / Re: Mavic Build - iRazoR
« on: February 10, 2018, 10:50:55 AM »
Is all written in my diary, you just have to read it ;)
Somewhere on the last pages I uploaded some photos with labels where which electronic is mounted.

For the Compass you have to physically disconnect the onboard Compass if it is the same chip as the external. I completely unsoldered mine from the board.

Pages: [1] 2 3 ... 17